Tunable High Entropy Lanthanide Oxide Microspheres via Confined Electroprecipitation in Emulsion Droplet Scaffolds.

Emergent high entropy nanomaterials and their associated complex surface structure hold promise to unlock unique catalytic intermediate pathways and photonic/plasmonic interactions; however, synthetic strategies to tune the size, morphological, and stoichiometric properties remain limited. This work demonstrates a confined electro-precipitation mechanism for the formation of tunable, high-entropy oxide microspheres within emulsion droplet scaffolds. This mechanism complements a traditional confined electrodeposition mechanism and explains the previously observed anomalous formation of thermodynamically unfavorable particles, including lanthanide species. Mass transfer studies reveal that microsphere coverage over a surface may be tuned and modeled by using a time-dependent modified Levich equation. Additionally, morphological tuning was demonstrated as a function of experimental conditions, such as rotation rate and precursor concentration. Finally, extension to multimetallic species permitted the generation of high-entropy lanthanide oxide microspheres, which were confirmed to have equimolar stoichiometries via energy dispersive spectroscopy and inductively coupled plasma mass spectrometry. This novel method promises to generate tunable, complex oxides with applications to thermal catalysis, optics, and applications yet unknown.

Acute and Chronic Toxicity of Uncured Resin Feedstocks for Vat Photopolymerization 3D Printing to a Cladoceran (Ceriodaphnia Dubia).

The accessibility and popularity of additive manufacturing (AM) has increased over the past decade. Environmental hazard assessment and safety data sheets for 3D printer feedstocks has lagged technology development. Vat photopolymerization may have unique risks relative to other AM technologies due to mishandling of uncured monomers/oligomer feedstocks and its decreasing cost enabling uninformed residential use. The acute and chronic toxicity of six uncured resins to Ceriodaphnia dubia was explored. Two-day acute toxicity (LC50) ranged from 2.6 to 33 mg/L and inhibition concentrations (IC25) values for reproduction ranged from 0.33 to 16 mg/L. Cleaning and waste management procedures recommended in user guides could be the most hazardous handling scenario as use of isopropyl alcohol increases miscibility and thus the fate, transport and bioavailability of the uncured resins. Residential users may often be poorly informed about potential toxicity and the need for a plan for use, handling, and waste management of uncured resins.

Air Quality Dispersion Modelling to Evaluate CIPP Installation Styrene Emissions.

Cured-in-place pipe (CIPP) is one of the most popular in situ rehabilitation techniques to repair sewer and water pipes. While there are multiple approaches to curing CIPP, steam-curing of styrene-based resins has been found to be associated with air-borne chemical emissions. Health officials, utilities and industry representatives have recognized the need to know more about these emissions, especially styrene. Such concern has led to multiple studies investigating the concentrations of volatile organic compounds on CIPP installation sites. This study expands upon previous effort by modeling worst-case, steam-cured CIPP emissions over a 5-year weather record. The effort also includes calibration of the model to emissions averages over the work day rather than instantaneous field measurements. Dispersion modelling software, AERMOD, was utilized to model the styrene component of CIPP emissions on two CIPP installation sites in the US. Based on the analysis results, it was found that the styrene emitted from stacks dissipates rapidly with styrene concentrations only exceeding minimum health and safety threshold levels at distances close to the stack (2 m or less). The values predicted by the model analysis are comparable with the field measured styrene concentrations from other studies. Current safety guidelines in the US recommend a 4.6-m (15-ft) safety perimeter for stack emission points. The results of this study indicate that significant and lasting health impacts are unlikely outside recommended safety perimeter. The results also validate the importance of enforcing recommended safety guidance on steam-cured CIPP sites.

Selecting an Optimal Faraday Cage To Minimize Noise in Electrochemical Experiments.

The ubiquitous Faraday cage, an experimental component particularly essential for nanoelectrochemical measurements, is responsible for neutralizing noise introduced by electromagnetic interference (EMI). Faraday cage designs abound in the literature, often exhibiting varying thicknesses, mesh sizes, and base materials. The fact that the Faraday cage composition most often goes unreported underscores the fact that many electrochemical researchers assume a 100% EMI reduction for any given design. In this work, this assumption is challenged from a theoretical and empirical perspective by highlighting the physical principles producing the Faraday effect. A brief history of the Faraday cage and a simplified theoretical approach introduce fundamental considerations regarding optimal design properties. In practice, time-domain noise profiles and corresponding Fourier transform frequency domain information for custom-built Faraday cages reveal that maximally conductive cages provide more optimal EMI exclusion.

Developmental, Behavioral and Transcriptomic Changes in Zebrafish Embryos after Smoke Dye Exposure.

(1) Background: Disperse Blue 14, Disperse Red 9, Solvent Red 169 and Solvent Yellow 33 have been used to color smoke; however, they have not been comprehensively assessed for their potential health hazards. (2) Methods: To assess the effects of these dyes, zebrafish embryos were exposed from 6 to 120 h post fertilization (hpf) to 10-55 µM Disperse Red 9, 1-50 µM Solvent Red 169, 7.5-13.5 µM Solvent Yellow 33 or 133-314 µM Disperse Blue 14. Embryos were monitored for adverse effects on gene expression at 48 hpf as well as for mortality, development and behavior at 120 hpf. The dyes were examined for their potential to cross the blood-brain barrier. (3) Results: Solvent Yellow 33 and Disperse Blue 14 impaired development and behavior at all concentrations. Disperse Red 9 impaired behavior at all concentrations and development at all concentrations except for 10 µM. Solvent Red 169 caused no effects. Mortality was only seen in Disperse Blue 14 at 261.5 and 314 µM. Gene expression indicated impacts on neurodevelopment and folate and retinol metabolism as potential mechanisms of toxicity. (4) Conclusions: Smoke dyes have a high potential for causing developmental changes and neurotoxicity and should be examined more closely using comprehensive approaches as used here.

Effect of Activated Carbon in Thin Sand Caps Challenged with Ongoing PCB Inputs from Sediment Deposition: PCB Uptake in Clams (Mercenaria mercenaria) and Passive Samplers.

Ongoing inputs, in the form of sediment deposition along with associated dissolved contaminants, have challenged the assessment of cap performance at contaminated sediment sites. To address this issue, thin 2-3 cm layer sand caps amended with activated carbon (AC) were investigated for the remediation of polychlorinated biphenyl (PCB) contaminated marine sediments using 90-day mesocosms. All treatments were challenged with (1) ongoing clean or marker-PCB-spiked sediment inputs and (2) bioturbation. Bioaccumulation in hard clams (filter feeding near the cap-water interface) was evaluated to best understand cap effectiveness, relative to sheepshead minnows (confined to the surface water) and sandworms (which burrowed through the caps). All caps (sand and AC amended sand) provided isolation of native bedded PCBs (i.e., PCBs sourced from the bed), reducing uptake in organisms. Total PCB bioaccumulation in clams indicated that AC addition to the cap provided no benefit with spiked influx, or some benefit (56% reduction) with clean influx. Spiked input PCBs, when added to the depositional input sediment, were consistently detected in clams and passive samplers, with and without AC in the cap. PCB uptake by passive samplers located in the caps did not reflect the performance of the remedy, as defined by clam bioaccumulation. However, PCB uptake by passive samplers in the overlying water reasonably represented clam bioaccumulation results.

Exploiting the Inherent Photophysical Properties of the Major Tirapazamine Metabolite in the Development of Profluorescent Substrates for Enzymes That Catalyze the Bioreductive Activation of Hypoxia-Selective Anticancer Prodrugs.

Hypoxia-selective cytotoxins (HSCs) seek to exploit the oxygen-poor nature of tumor tissue for therapeutic gain. Typically, HSCs require activation by one-electron bioreductive enzymes such as NADPH:cytochrome P450 reductase (CYPOR). Thus, successful clinical deployment of HSCs may be facilitated by the development and implementation of diagnostic probes that detect the presence of relevant bioreductive enzymes in tumor tissue. The work described here develops analogues of the well-studied HSC tirapazamine (3-amino-1,2,4-benzotriazine 1,4-di- N-oxide, TPZ) as profluorescent substrates of the one-electron reductases involved in bioactivation of HSCs. Hypoxic metabolism of TPZ or 7-fluoro-TPZ by one-electron reductases releases inherently fluorescent mono- N-oxide metabolites that may serve as indicators, probes, markers, or stains for the detection of the enzymes involved in the bioactivation of HSCs. In particular, profluorescent compounds of this type can provide a foundation for fluorescence-based bioassays that help identify tumors responsive to HSCs.

A switchable peroxidase mimic derived from the reversible co-assembly of cytochrome c and carbon dots.

We describe a straightforward tactic to boost the inherently low peroxidase-like activity of the heme-protein equine cytochrome c (cyt c) following its electrostatic assembly onto the carbon nanodot surface. This represents the first time that carbon nanodot interaction has been demonstrated to switch a protein into a high-performance enzyme for speeding up a reaction it was not evolved to catalyze. The dramatic enhancement in peroxidase-like activity stems in part from favorable local perturbations within the heme microenvironment of cyt c which are influenced by the chemistry presented at the carbon dot surface. That is, the observed peroxidase activity is clearly moderated by the choice of molecular precursors used to prepare the carbon dots, a choice which ultimately determines the surface charges present. An exceptional catalytic efficiency (kcat/KM) of 8.04 (±1.74) × 107 M-1 s-1 was determined for carbon dot/cyt c co-assemblies, close to the theoretical diffusion-controlled limit. Notably, the activity of the carbon dot/cyt c assembly can be switched off simply by increasing the ionic strength which results in dissociation into non-catalytic components.

Multinuclear copper(I) and silver(I) amidinate complexes: synthesis, luminescence, and CS2 insertion reactivity.

Dinuclear Cu(I) and Ag(I) complexes, Cu2[(2,6-Me2C6H3N)2C(H)]2, 1, Ag2[(2,6-Me2C6H3N)2C(H)]2, 2, Cu2[2,6-(i)Pr2C6H3N)2C(H)]2, 3, and Ag2[(2,6-(i)Pr2C6H3N)2C(H)]2, 4, were synthesized from reactions of [Cu(NCCH3)4][PF6] with Na[(2,6-R2C6H3N)2C(H)] and AgO2CCH3 with [Et3NH][(2,6-R2C6H3N2C(H)], R = Me, (i)Pr. Carbon disulfide was observed to insert into the metal-nitrogen bonds of 1 to produce Cu4[CS2(2,6-Me2C6H3NC(H)═NC6H3Me2)]4, 5, with a Cu4S8 core, which represents a rare transformation of dinuclear to tetranuclear species. Insertion is also observed with 2 and CS2, with the product likely being polymeric, 6. With the (i)Pr-derivatives, CS2 insertion was also observed, albeit at much slower rate, with 3 and 4 producing hexanuclear clusters, M6[CS2(2,6-Me2C6H3NC(H)═NC6H3Me2)]6, M = Cu, 7; Ag, 8. Complexes 1 and 5 display green luminescence, a feature not shared by their Ag(I) analogs nor with 3. Notably, oxygen acts as a collisional quencher of the luminescence from 1 and 5 at a rate faster than most metal-based quenchometric O2 sensors. For example, we find that complex 1 can be rapidly and reversibly quenched by oxygen, presenting a nearly 6-fold drop in intensity upon switching from nitrogen to an aerated atmosphere. The results here provide a platform from which further group 11 amidinate reactivity can be explored.